From $ 34.95
Delivery time 2-3 days
For a quick overview of how to perform a test see the Quick Reference Guide (slider above).
Please find the most recent version of the detailed instructions below. You always get a paper version of these instructions with your test kit.
Everything you need is included in the box.
To prepare your sample, you only need the following, which you probably already have at home:
IF YOU TEST PILLS:
To ensure that the concentration can be calculated for the entire pill, you should weigh it once in advance and make a note of the weight. You only need 50 mg (0.05 g) of your sample to perform the test. It is best to crush a whole pill, mix it well, and then test only 50 mg of this homogenized batch. The result will tell you the potency of the remaining homogenized powder.
We will give you a calculation example for this:
For example, the evaluation using the color scale indicates a concentration of 16 mg. Your starting material (e.g., a pill) has a total weight of 520 mg, and you have added 0.05 g of the total amount of your pill.
= concentration x (Tablet weight / 50 mg)
= 16 mg x (520 mg / 50 mg)
= 166.4 mg this value will correspond to the potency of the total pill.
IF YOU TEST CRYSTALS/POWDER:
Crystals are usually more concentrated than pills, so you only need 30 mg (0.03 g) of your sample to perform the test. It is best to crush a larger amount of crystals, mix it well, and then test only 30 mg of this homogenized batch. The result will tell you the potency of the remaining homogenized powder.
The big detection vial, which you use for evaluate the concentration of MDMA in the sample will not distinguish between MDA & MDMA. This means it may also turn purple when the sample contains MDA or a mixture of MDA & MDMA. Therefore we add the two additional small vials with the red and the blue lid. These allow you to first verify that your sample only contains MDMA and not MDA.
This is how your results should look like:
The small vial with the red cap shows no color change (remains a slightly orange color). The small vial with the blue cap displays a noticeable color change to blue/purple.
If your substance contains MDMA (and not MDA), you can rely on the MDMA concentration result of the MDMA QTest.
If you have other color results, please find further information here.
The MDMA QTest can also distinguish between different classes of active compounds (2CB, Amphetamines, MDMA/MDA).
Our QTests are more powerful than classic reagent tests. While reagent tests detect the presence of an active ingredient in a substance, our QTests quantify it. This means they determine the concentration of active ingredients in various psychoactive substances such as XCT pills or MDMA crystals.
Cool storage of the reagents at 35 - 46 °F, protected from direct sunlight (e.g., in a refrigerator), ensures that the consumables are shelf-stable for 6 months after production. Chilled storage is especially crucial for the two small vials, as discoloration can occur otherwise, affecting the interpretation.
Click here to find more FAQs or contact us via info@miraculix-lab.com
Our QTests were developed by our scientist, Dr. Felix Blei, in the laboratories of the University of Jena in Germany. Our tests are voluntarily validated according to a standardized test procedure based on the pharmaceutical method validation guideline ICH Q2(R1), which we have extended to the QTests.
Do you want to know more? Please take a look at our short validation of the MDMA QTest
The functionality and the precision of our QTests have already been tested & validated by a lot of customers and third parties:
Psychedelic Passage compares the results of our rapid tests with laboratory tests from Energy Control International (a long-standing drug-checking program in Spain) for identical samples and comes to convincing results:
The QTest where officially validated & approved for the federal drug-checking program ALIVE in the federal state of Thuringa (Germany).
The chemical structure of MDMA and MDA are really close. Therefore you will not see a difference between these compounds in the concentration result of the tests. That's why it is really important, that you first check if your sample only contains MDMA and no MDA. You could use classical reagent tests or our MDMA advanced Kit to test this. If MDA is present in your sample, the quantitative test results are not reliable.
Statistically, the active ingredient content in ecstasy has been increasing in recent decades, while at the same time, fewer admixtures have been detected. However many active ingredients will show no color reaction with the detection reagent. Are there only such ingredients present, you will see no color result. However, the presence of a mixture of such a substance with MDMA is problematic.
MDMA is not uniformly distributed within pills! And even pills which look identically could vary tremendously in their MDMA content. To ensure accuracy, it is essential to test every single pill and homogenize the pill thoroughly by crushing and mixing them for example in a small baggy, before conducting the test.
IMPORTANT:
The testing of a sample with our testkits should not be considered safe. Essential risks are associated with the consumption of any substance. Various factors influence testing outcomes and reactions. Miraculix does not take responsibility for result interpretation. Sample responses can differ due to lighting variations and specific substance blends being tested. The use or misuse of this information is not the responsibility of miraculix.
| Dimensions | 5,7 × 3,9 × 1,9 cm |
|---|---|
| Applications |
Advanced Kit – 1 test in one box, Advanced Kit – 2 tests in one box |
THE ADVANCED MDMA PURITY QTEST
The most precise at-home test kit for accurately determining MDMA content and purity in substances like pills and powders!
Watch the tutorial video
Provides accurate potency measurements
Requires minimal sample and simple steps
Developed and validated
at a university
The first and only potency test on the market
Delivers results in minutes
High Variations in Dosage!
These Punisher pills look similar but contain 80 to 263 mg MDMA-HCl, posing a high risk of overdose.
Our QTests provide precise analysis to minimize risks.
Harm Reduction for safer use.
EASY TO READ RESULTS
3-step process for determining MDMA potency using the MDMA QTest.
From Preparation to Extraction and Detection, the test enables a precise substance analysis.
The color changes of the MDMA QTest,
which enables a simple visual analysis of various substances.
The color scale ranges from light to strong, while anomalies such as 2C-B, Amphetamine,
and no MDMA can be clearly identified.
DEVELOPELD AND VALIDATED AT LEADING GERMAN UNIVERSITY
The QTests were developed with state funding at the University of Jena. They have been validated using reference standards at the university level and calibrated through precise instrumental analysis.
OFFICAL DRUG CHECKING TOOL
The QTests have been used in German state-organized programs since 2021 to analyze magic mushroom content and are verified by the German state before approval for drug checking.
| Applications | Advanced Kit – 1 test in one box, Advanced Kit – 2 tests in one box |
|---|
