MDMA QTEST (Basic)

Is shipping discreet?

Yes. Your order is shipped in neutral, unbranded packaging with no indication of the contents. This ensures full privacy.  For more information, please see our shipping details.

How long does shipping take?

Shipping within the USA and Canada usually takes 1–4 business days. Orders are shipped Monday to Friday from our US distribution center. Delivery times for other countries may vary due to customs procedures.

Do I need anything else to perform the test?

Everything you need is included in the box. For sample preparation, you may need a few common household items:

• A milligram scale to weigh an exact amount
• A small funnel or a folded piece of paper to transfer the powder into the extraction vial

How much material do I need for the test?

If you test pills: You only need 50 mg (0.05 g) of your sample. To calculate the total content of a pill, weigh it beforehand and note the weight. For best results, crush the entire pill, mix it thoroughly, and test 50 mg of this homogenized powder. The result reflects the potency of the full pill.

Example calculation:

• Measured concentration: 16 mg
• Pill weight: 520 mg
• Calculation: 16 mg × (520 mg / 50 mg) = 166.4 mg total content

If you test crystals/powder: Crystals are usually more concentrated, so you only need 30 mg (0.03 g). Crush and mix a larger amount, then test 30 mg of the homogenized sample. The result represents the potency of the remaining material.

Does the QTest identify MDMA and detect other substances?

The Basic MDMA QTest does not specifically identify MDMA alone. It may also turn purple in the presence of MDA or mixtures of MDA and MDMA. For this reason, you should first confirm that your sample contains only MDMA (and not MDA), using a reagent test or our advanced MDMA kit.

If MDMA is present (without MDA), the test can determine its concentration.

The Basic MDMA QTest can also differentiate between substance classes such as 2C-B, amphetamines, and MDMA/MDA.

What does “quantitative test” mean?

Unlike classic reagent tests, which only indicate whether a substance is present, QTests measure how much is present. This means you get the actual concentration of active ingredients, not just a yes/no result.

How long does the QTest last and how should I store it?

The reagents can be stored for at least 18 months. Store at 36–68°F / 2–20 °C, away from direct sunlight. For optimal stability, refrigeration is recommended

Haven’t found the answer you’re looking for?

Visit our FAQ section or contact us via info@miraculix-lab.de

Compliant with established pharmaceutical testing criteria – Pharmaceutical Validation ICH Q2(R1)

Our QTests were developed by our scientist, Dr. Felix Blei, in the laboratories of the University of Jena in Germany. Our tests are voluntarily validated according to a standardized test procedure based on the pharmaceutical method validation guideline ICH Q2(R1), which we have extended to the QTests.

Do you want to know more? Please take a look at our short validation of the MDMA-QTest

What others say about our QTest:

The functionality and the precision of our QTests have already been tested & validated by a lot of customers and third parties:

Psychedelic Passage compares the results of our rapid tests with laboratory tests from Energy Control International (a long-standing drug-checking program in Spain) for identical samples and comes to convincing results:

• MDMA Q-Test Result: The at-home test indicated that there are 28 mg of MDMA for every 30 mg of crystal. This can be represented as a ratio: 28 mg MDMA / 30 mg crystals (93% MDMA content)
• MDMA Lab Test Result: The lab test indicated that 89% of a 50 mg sample of crystals contained MDMA. This means that in a 50 mg sample, 89% (or 0.89) of it is MDMA, and the remaining percentage would be other components.

The QTest where officially validated & approved for the federal drug-checking program ALIVE in the federal state of Thuringa (Germany).

This test is not suitable for the identification of MDMA in substances.

The chemical structure of MDMA and MDA are really close. Therefore you will not see a difference between these compounds in the test results. That’s why it is really important, that you first check if your sample only contains MDMA and no MDA. You could use classical reagent tests or our MDMA advanced Kit to test this. If MDA is present in your sample, the quantitative test results are not reliable.

Statistically, the active ingredient content in ecstasy has been increasing in recent decades, while at the same time, fewer admixtures have been detected. However many active ingredients will show no color reaction with the detection reagent. Are there only such ingredients present, you will see no color result. However, the presence of a mixture of such a substance with MDMA is problematic.

MDMA is not uniformly distributed within pills! And even pills which look identically could vary tremendously in their MDMA content. To ensure accuracy, it is essential to test every single pill and homogenize the pill thoroughly by crushing and mixing them for example in a small baggy, before conducting the test.

IMPORTANT: The testing of a sample with our testkits should not be considered safe. Essential risks are associated with the consumption of any substance. Various factors influence testing outcomes and reactions. Miraculix does not take responsibility for result interpretation. Sample responses can differ due to lighting variations and specific substance blends being tested. The use or misuse of this information is not the responsibility of miraculix.